6NMB200V

Page 1 of 3

NEW 6.5 ” Neodymium Midbass, 2 ” voice coil, 200 W, 96 dB

KEY FEATURES:

96 db 1W / 1m average sensitivity
51 mm high temperature voice coil
400 W program power
Double aluminium demodulating rings for lower distortion and inductance and improved transient response
Water protected cone (front)
Epoxy anti-corrosion coating of top and back plates of magnet structure

PART NUMBER:

6NMB200V - 8 ohm - 11106N0108

6NMB200V - 16 ohm - 11106N0116

Application : Power midbass speaker

The 6NMB200V is high efficiency, high power midbass neodymium loudspeaker , specially designed to use in compact 2 way boxes and line array systems. It features 51 mm aluminium voice coil, vented aluminium die cast frame with powerful neodymium magnet structure, which achieved very light weight of the speaker. Using of double aluminium demodulating rings on the magnet structure reduce dramatically distortion and inductance and improve transient response.The top and back plates are treated with special high quality epoxy electro-deposition coating, which extremely improves the corrosion resistance of the speaker.

SPECIFICATIONS

Nominal Diameter
Impedance
Minimum Impedance
Power Capacity ¹
Program Power ²
Sensitivity
Frequency Range
Voice Coil Diameter
Voice Coil Material
Voice Coil Former
V. C. Winding Depth
Magnet Gap Depth
Cone Material
Basket
Magnet
Flux Density

6.5"/170 inch/mm
16 Ohm
12.48 Ohm
200 W
400 W
(200-3000 Hz) 96 dB/W/m
200 – 5000 Hz
51 mm
Aluminium
Glass fiber
12.5 mm
7 mm
Paper with carbon fibers
Die cast aluminium
Neodymium
1.37 T

THIELE-SMALL PARAMETERS

Qms

Qes

Qts

Vas

Mms

Xmax*

Cms

Le at 1kHz

EBP

79.00 Hz

5.82

0.279

0.267

9.53 Litres

12.19 grams

10.70 Ohms

139 cm2

± 4.5 mm

0.333 mm/N

15.22 T.m

0.383 mH
283

1. 2 hours test made with continuous pink noise signal with Crest factor 6 dB, within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
2. Program power is defined as 3db greater than Power Capacity.

* Linear Mathematical Xmax is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg is the gap depth.

MOUNTING INFORMATION

Overall Diameter
Baffle Hole Diameter
Mounting Holes
Bolt Circle Diameter
Overall Depth
Net Weight

185 mm
145 mm
4 elliptic 5.5 / 6.5 mm
170/172 mm
81.8 mm
1.62 kg

RECONE KIT:

RK6NMB200V - 8 ohm - Part No: R1106N0108

RK6NMB200V - 16 ohm - Part No: R1106N0116