- 115 mm ( 4.5”) high temperature sandwich voice coil
- 3200 W AES program power
- Vented neodymium magnet assembly with massive heatsink
- Double aluminium demodulating rings for lower distortion and improved heat dissipation
- Double silicone spiders for improved excursion control and linearity
- Water protected cone
- Epoxy anti-corrosion coating of top and back plates of magnet structure
PART NUMBER: 11118N0208
Application : High power bass
The 18NXB1601 neodymium bass loudspeaker is specially designed for horn application to deliver very high impact bass response, with exceptional high power capacity. It incorporates an 4.5" sandwich voice coil, double silicone spider assembly, paper cone with carbon fibers and die cast vented aluminium frame. Powerful, vented neodymium magnetic structure with massive heatsink and double demodulating rings reduced power compression. The result is high efficient transducer for bass horn applications, with the ability to handle very high excursion with low distortion and reduced thermal power compression.
Power Capacity AES ¹
Program Power ²
Voice Coil Diameter
Voice Coil Material
Voice Coil Former
V.C. Winding Depth
Magnet Gap Depth
depends on the horn
30 - 250 Hz
115 mm (4.5”)
Paper with carbon fibers
Die cast aluminium
± 12.5 mm
1. AES standard. Power is calculated on rated minimum impedance. Measurement is in 180 L box enclosure tuned 43 Hz using a 40-400 Hz band limited pink noise test signal applied continuously for 2 hours.
2. Program power is defined as 3db greater than AES Power Capacity.
* Linear Mathematical Xmax is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg is the gap depth.
Baffle Hole Diameter
Bolt Circle Diameter
8 eliptic 7 x 8,5 mm
RK18NXB1601 - Part No: R1118N0208
Frequency Response depends on the horn.