KEY FEATURES:
- 97.5 db 1W / 1m average sensitivity
- 100 mm high temperature copper voice coil
- 1400 W AES program power
- Vented ferrite magnet assembly
- Two aluminium demodulating rings for lower distortion and improved heat dissipation
- Double silicone spider
- Epoxy anti-corrosion coating of top and back plates of magnet structure
PART NUMBER: 11115F1908
Application : High power midbass
15MB701 loudspeaker combining good linearity and efficiency with high power handling capabilities, with use of 100 mm copper voice coil and double silicone spider. It features aluminium die cast frame, vented ferrite magnet structure with two demodulating rings. 15MB701 is suitable for application in a wide variety of enclosure types and particularly as LF driver in 2- or 3- way boxes.
SPECIFICATIONS
Nominal Diameter
Impedance
Minimum Impedance
Power Capacity AES ¹
Program Power ²
Sensitivity
Frequency Range
Voice Coil Diameter
Voice Coil Material
Voice Coil Former
V. C. Winding Depth
Magnet Gap Depth
Cone Material
Basket
Magnet
Flux Density
15"/385 inch/mm
8 Ohm
6.94 Ohm
700 W
1400 W
(200-2000 Hz) 97.5 dB/W/m
45 - 2500 Hz
100 mm
Copper
Glassfiber
23 mm
9 mm
Kevlar paper + glassfiber
Die cast aluminium
Ferrite
1.28 T
THIELE-SMALL PARAMETERS
44.24 Hz
12.03
0.274
0.268
100.22 litres
124.10 grams
5.4 Ohms
829.6 cm2
± 9.25 mm
0.104 mm/N
26.05 T.m
0.92 mH
1. AES standard. Power is calculated on rated minimum impedance. Measurement is in 120 L box enclosure tuned 56 Hz using a 40-400 Hz band limited pink noise test signal applied continuously for 2 hours.
2. Program power is defined as 3db greater than AES Power Capacity.
* Linear Mathematical Xmax is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg is the gap depth.
MOUNTING INFORMATION
Overall Diameter
Baffle Hole Diameter
Mounting Holes
Bolt Circle Diameter
Overall Depth
Net Weight
389 mm
353 mm
8 with dia. 7mm
372 mm
165.4 mm
10.45 kg
RECONE KIT:
RK15MB701 - Part No: R1115F1908