KEY FEATURES:
- 99 db 1W / 1m average sensitivity
- 77 mm high temperature aluminium voice coil
- 800 W AES program power
- Powerful, ferrite 180 mm magnet structure
- Water protected cone (front)
- Epoxy anti-corrosion coating of top and back plates of magnet structure
PART NUMBER: 11110F0208
Application : Power midbass speaker
The 10MB300 loudspeaker is primary designed to be used in medium and long throw horn loaded systems. The special Kevlar paper cone guarantees reliable using in horns with compression chamber with ratio up to 3.5:1.
SPECIFICATIONS
Nominal Diameter
Impedance
Minimum Impedance
Power Capacity AES ¹
Program Power ²
Sensitivity
Frequency Range
Voice Coil Diameter
Voice Coil Material
Voice Coil Former
V. C. Winding Depth
Magnet Gap Depth
Cone Material
Basket
Magnet
Flux Density
10"/262 inch/mm
8 Ohm
6.52 Ohm
400 W
800 W
(200-2000 Hz) 99 dB/W/m
80 - 2500 Hz
77 mm
Aluminium
Kapton™
15 mm
9 mm
Kevlar Paper
Die cast aluminium
Feritte
1.33 T
THIELE-SMALL PARAMETERS
64.70 Hz
9.66
0.251
0.244
22.75 Litres
38.13 grams
5.43 Ohms
317.3 cm2
±5.25 mm
0.159 mm/N
18.32 T.m
0.72 mH
1. AES standard. Power is calculated on rated minimum impedance. Measurement is in 30 L box enclosure tuned 60 Hz using a 50-1000 Hz band limited pink noise test signal applied continuously for 2 hours.
2. Program power is defined as 3db greater than AES Power Capacity.
* Linear Mathematical Xmax is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg is the gap depth.
MOUNTING INFORMATION
Overall Diameter
Baffle Hole Diameter
Mounting Holes
Bolt Circle Diameter
Overall Depth
Net Weight
263 mm
225 mm
8 with dia. 7 mm
244 mm
120 mm
6.8 kg
RECONE KIT:
RK10MB300 - Part No: R1110F0208