KEY FEATURES:
- 98 db 1W / 1m average sensitivity
- 77 mm high temperature sandwich voice coil
- 1000 W AES program power
- Powerful, vented 180 mm magnet structure
- Aluminium demodulating ring for lower distortion and improved heat dissipation
- Silicone spider
- Epoxy anti-corrosion coating of top and back plates of magnet structure
PART NUMBER: 11118F0908
Application : Power bass
The 18B450 has been specially designed for low frequency reproduction in bass reflex enclosures. It feature vented die cast aluminium frame, 180 mm magnet structure and 3” voice coil. It is suitable for economic subwoofer application.
SPECIFICATIONS
Nominal Diameter
Impedance
Minimum Impedance
Power Capacity AES ¹
Program Power ²
Sensitivity
Frequency Range
Voice Coil Diameter
Voice Coil Material
Voice Coil Former
V. C. Winding Depth
Magnet Gap Depth
Cone Material
Basket
Magnet
Flux Density
18"/461 inch/mm
8 Ohm
6.40 Ohm
500 W
1000 W
(50 - 200 Hz) 98 dB/W/m
35 – 1000 Hz
77 mm
Copper
Glassfiber
20 mm
11 mm
Paper
Die cast aluminium
Ferrite
1.2 T
THIELE-SMALL PARAMETERS
34.38 Hz
8.03
0.357
0.342
241.55 Litres
152.76 grams
5.29 Ohms
1110 cm2
± 7.25 mm
0.140 mm/N
22.12 T.m
1.49 mH
1. AES standard. Power is calculated on rated minimum impedance. Measurement is in 180 L box enclosure tuned 43 Hz using a 40-400 Hz band limited pink noise test signal applied continuously for 2 hours.
2. Program power is defined as 3db greater than AES Power Capacity.
* Linear Mathematical Xmax is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg is the gap depth.
MOUNTING INFORMATION
Overall Diameter
Baffle Hole Diameter
Mounting Holes
Bolt Circle Diameter
Overall Depth
Net Weight
461 mm
417 mm
8 eliptic 7 x 8,5 mm
438/441 mm
192.5 mm
8.55 kg
RECONE KIT:
RK18B450 - Part No: R1118F0908