KEY FEATURES:
- 98.5 db 1W / 1m average sensitivity
- 100 mm high temperature sandwich voice coil
- 2400 W AES program power
- Powerful, vented ferrite magnet structure
- Triple aluminium demodulating rings for ultra low THD and improved heat dissipation
- Double silicone spider for improved excursion control and linearity
- Water protected cone (front)
PART NUMBER: 11118F0408
Application : High Power Bass
The 18XB1201 is new version of 18XB1301 . It is ferrite bass loudspeaker is specially designed to deliver very high impact bass response, with exceptional high power capacity. It incorporates an 4” sandwich voice coil with split winding , double silicone spider assembly, carbone paper cone and die cast vented aluminium frame. New powerful, vented ferrite magnetic structure with triple demodulating rings which reduced power compression and dramatically reduse THD. 18XB1201 is with reduced Mms which gives very fast response. The result is high efficient transducer for subwoofer applications, with the ability to handle very high excursion with ultra low distortion and reduced thermal power compression.
SPECIFICATIONS
Nominal Diameter
Impedance
Minimum Impedance
Power Capacity AES ¹
Program Power ²
Sensitivity
Frequency Range
Voice Coil Diameter
Voice Coil Material
Voice Coil Former
V.C. Winding Depth
Magnet Gap Depth
Cone Material
Basket
Magnet
Flux Density
18"/461 inch/mm
8 Ohm
6,55 Ohm
1200 W
2400 W
(50-200 Hz) 98.5 dB/W/m
35 - 1000 Hz
100 mm
Copper
Glassfiber
28 mm
14 mm
Carbone paper
Die cast aluminium
Ferrite
1.00 T
THIELE-SMALL PARAMETERS
38.05 Hz
6.92
0.332
0.317
159.37 Litres
188.94 grams
5.25 Ohms
1158 cm2
± 10.5 mm
0.0926 mm/N
26.71 T.m
1.22 mH
1. AES standard. Power is calculated on rated minimum impedance. Measurement is in 180 L box enclosure tuned 43 Hz using a 40-400 Hz band limited pink noise test signal applied continuously for 2 hours.
2. Program power is defined as 3db greater than AES Power Capacity.
* Linear Mathematical Xmax is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg is the gap depth.
MOUNTING INFORMATION
Overall Diameter
Baffle Hole Diameter
Mounting Holes
Bolt Circle Diameter
Overall Depth
Net Weight
461 mm
417 mm
8 eliptic 7 x 8,5 mm
438/441 mm
210 mm
15.95 kg
RECONE KIT:
RK18XB1201 - Part No: R1118F0408